No products
- English
- Français
HS-60
- Access
- Akai
- Alesis
- ARP
- Behringer
- Pedals (BOSS / Roland)
- Casio
- Cyclone analogic
- Elektron
- Ensoniq
- E-MU
- Korg
- Kurzweil
- Moog
- Nord
- Novation
- Oberheim
- Rhodes
-
Roland
- Axis-1
- Boss DR-55 Dr. Rhythm
- Boss KM-60
- CMU-800
- CR-78
- CR-5000 CR-8000
- CSQ-100/600
- D-5
- D-10
- D-20
- D-50
- D-70
- EP-09
- HS-10
- HS-60
- HS-80
- Jazz Chorus Amplifier Series
- JD-800
- JUNO-1
- JUNO-2
- JUNO-6
- JUNO-60
- JUNO-106
- JUPITER-4
- JUPITER-6
- JUPITER-8
- JX-3P
- JX-8P
- JX-10 Super JX
- MC-202
- MC-303
- MC-505
- MC-808
- MC-909
- MKB-200
- MKS 7, 20, 30, 50, 70, 80, 100
- PA- Vintage Mixer Series
- PG-200
- PROMARS
- Space Echo (RE-101, RE-150, RE-201, RE-301, RE-501)
- RS-09
- RS-505 Paraphonic
- SA-09 Saturn 09
- SBF-325
- SBX-10/80/1000
- SH-1
- SH-2
- SH-3 SH-3A
- SH-5
- SH-7
- SH-09
- SH-32
- SH-101
- SH-1000
- SH-2000
- SPH-323
- SPV-355
- SVC-350
- SYSTEM 100
- SYSTEM 100M & 700
- TB-303
- TR-8
- TR-77
- TR-505/TR-626
- TR-606
- TR-707/727
- TR-808
- TR-909
- U-20
- VK-1
- VK-09
- VP-330
- W-30
- Sequential Circuits
- Sound Master
- Synths & Gear
- x0xb0x
- Yamaha
- Electronic Components
- Accessories
Back in stock
Cyclone Analogic TT-303 Bass Bot MK1
Viewed products
-
Korg Mono/Poly Power...
High quality power switch Korg....
-
Moog Slider 1MA
Moog Slider 1MA potentiometer New
-
Orange Moog Slider Cap
Moog slider cap, grey with orange inlay.
-
Korg M1 POWER SWITCH
Power switch on/off, latching...
-
Prophet-600 Strip...
Rubber Contacts 7-Note Strip with...
HS-60 There are 55 products.
-
6,00 € In StockSlider Cap – Roland Juno-106
x1 Plastic slider cap for Roland Juno-106. Injection-molded plastic cap for slider potentiometers on Roland Juno-106, HS-60, and MKB-200. Exact fit and authentic look.
6,00 €In Stock -
8,00 € In StockJuno-106 Knob Roland
x1 Rotary knob for Roland Juno-160 (volume, portamento) *These like all our knobs and caps are made by injection mold like the original one with perfect color matched, these are not cheap quality or 3D reproduction.
8,00 €In Stock -
45,00 € In StockX10 Caps, x1 knob Kit Juno-106 Roland
x10 Plastic slider cap and x1 rotary knob for Roland Juno-106. *These like all our knobs and caps are made by injection mold like the original one with perfect color matched, these are not cheap quality or 3D reproduction.
45,00 €In Stock -
59,00 € In StockHS-60 Pitch Bend / Bender Assembly, Roland
Complete PB-9 pitch bend unit for Roland HS-60. Includes potentiometer, switch, PCB, wiring harness, bender frame, and connector... Fully calibrated and ready to install.
59,00 €In Stock -
33,00 € In StockComplete Bender Pitch/Modulation Lever –...
Complete pitch and modulation bender lever assembly for Roland SH-101, Juno-106, HS-60, and MKB-200 synthesizers. Includes base plate, spring, and screw. *Injection-molded just like the original parts, with a precisely matched color. These are not 3D-printed reproductions or low-grade substitutes.
33,00 €In Stock -
33,00 € In StockRed Bender lever SH 101, Juno 106...
Roland replacement Bend lever - Mod wheel Red version limited edition, only a few left.
33,00 €In Stock -
20,00 € In StockRoland Bender Lever for SH 101, Juno 106
Replacement bender lever with fixing screw, matching the original part fitted on SH 101, Juno-106, HS-60 and MKB-200.
20,00 €In Stock -
21,00 € In Stock -
4,00 € In StockSpring for Roland Bender
Replacement return spring for bender levers on various Roland synthesizers. Compatible with SH-101, Juno-106, JD-800, HS-60, and others.
4,00 €In Stock -
23,90 € In StockJuno-106 Pitch Bender Potentiometer 100KB...
100KB rotary potentiometer with center tap for the Roland Juno 106 pitch bender. Stable center return and response matched to the original lever travel.
23,90 €In Stock -
9,00 € In StockBender Panel Self-adhesive Juno-106
Self-adhesive panel bender overlay for Juno-106.
9,00 €In Stock -
6,00 € In StockRoland Bender Modulation Switch –...
New tactile switch for the Bender modulation in Roland synths (Juno‑106, SH‑101, JX‑8P, S‑Series).
6,00 €In Stock -
2,50 € In StockBender rubber stop - Roland HS-60
Replacement rubber stop for the pitch bender on Roland HS-60. Sold individually.
2,50 €In Stock -
12,00 € In Stock -
9,00 € In StockSlider Roland JUNO 106
1x 50k linear fader potentiometer with dust cover for the front panel of the Roland JUNO 106 vintage synthesizer, excluding the HPF slider and the sliders used in the bender section. New and high quality
9,00 €In Stock -
33,00 € In Stock4x Sliders Roland JUNO 106
4pcs New and high quality sliders / faders 50kb with dust cover.
33,00 €In Stock -
18,00 € In Stock2x Sliders Roland JUNO 106
2pcs New and high quality sliders / faders 50kb with dust cover.
18,00 €In Stock -
58,00 € In Stock8x Sliders Roland JUNO 106
8pcs New and high quality sliders / faders 50kb with dust cover.
58,00 €In Stock -
99,00 € In Stock16x Sliders Roland JUNO 106
16x New and high quality sliders / faders 50kb with dust cover.
99,00 €In Stock -
22,90 € In StockJUNO-106 HPF Slide Switch, Roland
4 position slide switch for the High Pass Filter section of the Roland JUNO 106 vintage synthesizer.
22,90 €In Stock -
14,00 € In Stock -
8,90 € In StockToggle Switch 2 position Roland Moog
Toggles Switch 2-position, side to side (not straight position)
8,90 €In Stock -
12,00 € In StockDual Volume Potentiometer 10KBx2 – For...
Original-style dual potentiometer (10KBx2) for volume control on vintage Roland synthesizers. Requires soldering.
12,00 €In Stock -
16,00 € In Stock -
8,00 € In StockRoland Juno-106 Mono Jack 1/4 inch
1/4" Jack Female Connector Mono, Panel Mount, Roland. *There are two versions of jack plug for Juno-106 with different footprints, the other version is available by clicking HERE
8,00 €In Stock -
8,00 € In StockJuno-106 Phone Jack 1/4 inch
1/4" Jack Female Connector Mono, Panel Mount, Roland. *There are two versions of jack plug for Juno-106, the other version with a different footprints is available by clicking HERE
8,00 €In Stock -
8,00 € In StockJuno-106 Jack Headphone Stereo
1/4" Jack Female Connector stereo, Panel Mount, Roland.
8,00 €In Stock -
1,00 € In Stock -
15,00 € In Stock -
49,99 € In StockJuno-106 Complete Keyboard Contact Strip...
Complete high quality keyboard contact strip set for Roland Juno-106, including 4 strips of 12 notes and 1 strip of 13 notes for full 61-key coverage.
49,99 €In Stock -
11,00 € In StockJuno-106 Strip 12-Note Rubber Contacts Roland
Rubber Contacts 12-Note Strip with carbon pads for keyboard keys contacts, high quality.
11,00 €In Stock -
13,00 € In StockJuno-106 Strip 13-Note Rubber Contacts Roland
High quality 13-note keyboard contact strip for Roland Juno-106.
13,00 €In Stock -
7,00 € In StockJuno-106 Strip 7-Note Rubber Contacts Roland
Rubber Contacts 7-Note Strip with carbon pads for keyboard keys contacts, high quality.
7,00 €In Stock -
6,00 € In StockJuno-106 Strip 5-Note Rubber Contacts Roland
Rubber Contacts 5-Note Strip with carbon pads for keyboard keys contacts, high quality.
6,00 €In Stock -
12,00 € In Stock -
9,00 € In Stock -
26,00 € In StockBezel for Roland Juno-106 Display
Replacement bezel for the display window of Roland Juno-106 and HS-60. Available in red, mirror, or blue finish. Fully compatible with original dimensions.
26,00 €In Stock -
45,90 € -15% 54,00 € In StockRoland Juno-106 Blue Led Mod Kit
LED kit for Roland Juno 106 and HS 60. Includes 15 blue diffused LEDs, 1 white diffused LED for bank indication, and a blue dual digit seven segment display. Choice of mirror bezel, blue bezel, or no bezel. Compatible with Roland Juno 106 and HS 60.
45,90 € -15% 54,00 €Reduced price!In Stock -
0,89 € In StockRubber key bushing — Roland HS-60
Rubber keybed bushing for the Roland HS-60.Roland part numbers: 068H004 / 22155716.Available individually, in a pack of 6, or a pack of 12.
0,89 €In Stock -
1,25 € In StockReplacement key return springs - Roland HS-60
Key return springs made to fit the Roland HS-60 keybed. Roland part numbers 22175132 / 070H029.
1,25 €In Stock -
10,00 € In StockKey Roland HS-60
Key for the Roland HS-60 keybed.Select your note in the product variations.
10,00 €In Stock -
9,00 € In Stock3V Battery for Roland HS 60
Panasonic 3V lithium battery used for internal memory backup in the Roland HS 60 synthesizer.
9,00 €In Stock -
7,00 € In Stock -
3,00 € In Stock4558 dual op-amp
High-quality 4558 dual operational amplifier IC, selected and tested for reliable performance in vintage synthesizers, drum machines, and audio equipment. Fully compatible with a wide range of classic gear including Yamaha DX7, Korg Polysix, Wavestation, Lambda, EX7, DS‑55, Moog Liberation, and more. Ideal for restoring audio circuitry.
3,00 €In Stock -
12,00 € In Stock -
8,00 € In StockBA6110
BA6110 "BA662 substitute" Rohm SIP-9.Semiconductor single OTA/VCA with buffer in a SIP package.
8,00 €In Stock -
2,80 € In Stock -
5,00 € Out of stock -
5,00 € Out of stock -
5,00 € In Stock -
6,00 € In Stock -
10,00 € Out of stock -
3,00 € In Stock -
5,50 € In Stock -
3,00 € In StockIC, 4050 hex buffer/converter
4050 hex buffer/converter IC. You will receive either a CD4050BE, CD4050BP, or TC4050BP depending on stock availability. All versions are fully compatible, functionally identical, and interchangeable, CD4050BE (ceramic), CD4050BP (plastic) and TC4050BP (Toshiba).
3,00 €In Stock