No products
Original push button cap for Roland Juno-60 synthesizer. Used part, sold individually, with selectable color. Not compatible with Hold, Arpeggio (On/Off) and Key Transpose buttons.
Black rotary knob with orange indicator, knurled shaft compatible. Used on TR‑808, CR‑5000, CR‑8000, RS‑09, Juno‑6/60, EP‑09, DR‑55, System 100M, VK‑09 and many other vintage Roland synthesizers.
(Bender) pitch/mod lever for SH-1, SH-2, SH-7, SH-09, Juno-6, Juno-60, Jupiter-4, Jupiter-6, Jupiter-8.
Original dual-digit 7-segment red LED display, identical to the unit fitted in the Roland Juno-60.This part restores the synth’s front-panel numeric readout exactly as it left the factory, with the same dimensions, brightness, and color tone.
Original used LED board assembly for the Roland JUNO 60 vintage synthesizer. Two digit 7 segment red display used for program number indication. Marked OPH194A 149H194A on the board, PCB code 052H415A.
Rotary potentiometer for Bender. *Note: the original potentiometer is 24mm. This is a 16mm replacement — the locating pin hole in the bender plate therefore requires slight enlargement with a round file. Alternatively, the locating pin can be removed with pliers, but this will eliminate the anti-rotation function.
Original-style dual potentiometer (10KBx2) for volume control on vintage Roland synthesizers. Requires soldering.
Original used Roland panel push switch, part number 13169605. Professionally cleaned to restore clean contact operation. Used on the Roland JUNO 60 front panel and other compatible vintage Roland units.
3 position toggle switch with 15 mm lever for Roland vintage synthesizers and drum machines. Available with two shaft types, for original style restoration or a more affordable alternative.
Toggles Switch 2-position, side to side (not straight position)
Replacement LFO Trig switch for Roland JUNO‑60, supplied with a custom PCB adapter for direct installation in place of the original part. This is the best alternative solution if you can't source the original switch for LFO TRIG used in the JUNO-60.
Rubber key bushing for the Roland Juno-60.Roland part numbers: 068H004 / 22155716.Available individually, in a pack of 6, or a pack of 12.
Replacement key return springs for Roland Juno-60. Compatible with Roland part numbers 22175132 / 070H029.
Replacement key for the Roland Juno-60.Excellent condition.Select your note in the product variations.
Slider 50KA potentiometer *require bending the corner mounting posts out very slightly to match the PCB holes, the shaft is slightly different, but the slider knob fits onto it perfectly.
Slider 10KA potentiometer *require bending the corner mounting posts out very slightly to match the PCB holes, the shaft is slightly different, but the slider knob fits onto it perfectly.
Slider 1MA potentiometer *require bending the corner mounting posts out very slightly to match the PCB holes, the shaft is slightly different, but the slider knob fits onto it perfectly.
Slider 50KB potentiometer *require bending the corner mounting posts out very slightly to match the PCB holes, the shaft is slightly different, but the slider knob fits onto it perfectly.
High quality power switch Roland. Carries ENEC (European) and UL (American) approvals and complies with RoHS.
New and reliable 3V lithium battery for Roland Juno-60. Available as a single unit or as a 5-pack.
High-quality 4558 dual operational amplifier IC, selected and tested for reliable performance in vintage synthesizers, drum machines, and audio equipment. Fully compatible with a wide range of classic gear including Yamaha DX7, Korg Polysix, Wavestation, Lambda, EX7, DS‑55, Moog Liberation, and more. Ideal for restoring audio circuitry.
BA6110 "BA662 substitute" Rohm SIP-9.Semiconductor single OTA/VCA with buffer in a SIP package.
TC5514APL New Old Stock (NOS), very limited stock. RARE Always stored in anti-static tubes, and shipped in an anti-static bag.
Circuit intégré CMOS à quatre commutateurs analogiques bidirectionnels en boîtier DIP-14. Vous recevrez un TC4066BP ou un MC14066BCP selon les stocks. Les deux versions sont entièrement compatibles et interchangeables.
4050 hex buffer/converter IC. You will receive either a CD4050BE, CD4050BP, or TC4050BP depending on stock availability. All versions are fully compatible, functionally identical, and interchangeable, CD4050BE (ceramic), CD4050BP (plastic) and TC4050BP (Toshiba).
CD4069 IC CD4069UBE / TC4069UBP CMOS logic integrated circuit in a DIP-14 package.You will receive either a CD4069UBE or a TC4069UBP depending on stock availability. Both versions are fully compatible and interchangeable.
74LS42 BCD-to-decimal (1-of-10) decoder IC, 16-pin DIP. You will receive either a 74LS42PC, a HD74LS42P, or another 74LS42 variant depending on stock availability. All versions are fully compatible, functionally identical, and interchangeable. Sold individually.
NJM072S / NJM072SP dual J-FET input op amp, 9-pin SIP package. Sold individually.
8253 programmable interval timer/counter IC, 24-pin DIP. You will receive a M5L8253P-5, uPD8253C, D8253C-2, or another 8253 variant depending on stock availability.All versions are fully compatible, functionally identical, and interchangeable. Sold individually.
Toshiba 4099 / TC4099BP 8-bit addressable latch IC, 16-pin DIP. Sold individually.
4013 / HD14013BP dual D-type flip-flop IC, 14-pin DIP. Sold individually.
4013BE Dual D Flip-FlopStored and shipped with anti static bag.